Consist of and data
Three roller canlander consist of roller canlander,water temprature control system,hydraulic power station.
Technical Data
roller diameter： φ400/φ600/φ600
Length： L=1350mm
Driver power ： 1.5kW×3
Max speed： 4.5m/min
Mobile motor: 0.75kW
Data of temprature control units
Pump power： 2.2kW×3
Heating power： 12kW×3
Cooling area： 5m2×3
Data of hydraulic (see electric instructions)
Three roller calander's Lifting and transportation
1,Lifting
Three roller calander the hoisting smooth machine needs 6 tons of sling hoisting, in hoisting process please taking protective measures to protect the rollers surface, and in condole belt and three roll with a soft things between separated, to prevent the surface in hoisting process scratch.
2,Transportation
Transportation, must the three roller press machine firmly fixed in light of packing. At the same time, to three rollers rollers package protection, prevent damage in transit.
Install
Three roller calander machine and the whole line positioning is installed simultaneously. According to production line layout, will guide according to the foundation in the ground, and then figure layout three roller calander machine in place
Characters
Adopt wallboard type roller structure. Basically have frame, rollers, the rollers transmission mechanism, roller from adjusting mechanism, three rollers mobile system, three rollers center height adjustment mechanism, the rollers temperature control system etc.
1,Frame by base and wallboard etc, base by steel welded, wallboard for whole
2,The rollers adopt high quality alloy steel, internal adopts medium temperature circulation, three groups of roller, intermediate roller bearings fixed, only can rotate cannot move, the upper and lower rollers relative among the rollers through hydraulic transmission
3,Transmission mechanism
The rollers rotation by three direct drive motor through reducer, gear reducer output shaft for hollow shaft, hollow shafts rollers axle directly suit in carry on